Chapter 5
Configuring ACS in Wizard Mode
There are six configuration steps displayed in the menu panel of the Web
Manager in Wizard mode. The following table lists the sections where the
steps are described.
Step 1: Security Profile
A Security Profile consists of a set of parameters that can be configured in
order to have more control over the services that are active at any time.
Pre-defined Security Profiles
There are three pre-defined security profiles:
1. Secure - The Secure profile disables all protocols except SSHv2, HTTPS,
and SSH to Serial Ports. Authentication to access Serial Ports is required,
and SSH root access is not allowed.
Step 1: Security Profile Page 83
Step 2: Network Settings Page 91
Step 3: Port Profile Page 94
Step 4: Access Page 97
Step 5: Data Buffering Page 102
Step 6: System Log Page 107
To Next Page
Loading...
