AlterPath ACS Installation, Administration, and User’s Guide 67
IPDU Multi-Outlet Ctrl
power supply device is connected to are on the same PM or not, the outlets
can be grouped together and managed simultaneously from this form.
When you select IPDU Multi-Outlet Ctrl form, the following figure appears
if,
1. There is no multi-outlet device defined.
2. Power Management is not enabled for the serial port the device is
connected to.
3. ACS cannot detect an AlterPath PM that has been configured for power
management.
Contact the ACS administrator for help, if you see this message.
Figure 3-9: Regular User > IPDU Multi-Outlet (no permissions)
The following form appears if you have permission to view and control the
outlets that a multi power supply server or device is connected to.
To Next Page
Loading...
