AlterPath ACS Installation, Administration, and User’s Guide 291
6. If using AlterPath Bio for an additional layer of security, enable
“Biometric Authentication Required” field. (Console SSH connection
protocol only)
7. To change the keep-alive interval, enter another number in the “TCP
Keep-alive Interval” field.
8. To change the idle timeout interval, enter another value in the “Idle
Timeout” field.
9. Specify stty options, if desired, in the “STTY Options” field.
10. To change the break interval, enter a new number in the “Break Interval”
field.
11. To change the break sequence, enter a new sequence in the “Break
Sequence” field.
12. To change the content of the login banner, enter new content in the “Login
Banner” field.
13. Click “Done.”
14. Click “apply changes.”
T To Configure Terminal Server Connection Options
Do this procedure if you have connected a computer terminal to a serial port.
1. Select the port and choose a terminal server (TS) profile from the
“Connection Protocol” drop-down menu on General form.
2. Select the “Other” tab.
The Other form appears.
3. To change the port number used to access the serial port, enter another
number in the “TCP Port” field.
4. To change the keep-alive interval, enter another number in the “TCP
Keep-alive Interval” field.
5. To change the idle timeout interval, enter another value in the “Idle
Timeout” field.
6. Specify stty options, if desired, in the “STTY Options” field.
To Next Page
Loading...
