AlterPath ACS Installation, Administration, and User’s Guide 39
Basic Installation Procedures
c. To see what version of the Java plug-in is registered, do the following
steps.
i. Go to Help > About Plug-ins.
ii. Scroll to the Java Plug-in section.
iii. Check whether the registered Java plug-in is the same as the
version you installed.
T To Install JRE Version 1.4.2 or later and Register the Plug-in
1. Make sure that JRE 1.4.2 or later is installed on the computer.
If needed, download the JRE from http://java.com.
The web site
automatically checks your configuration and installs the latest version of
JRE if one is not available.
2. If JRE is already installed on your system and you just want to activate
your browser, do the following steps.
a. Go to your system's Control Panel > Java Plug-in > Browser
b. Enable the browser(s) for Java Plug-in.
c. Test your browser(s) to see if the correct Java Plug-in is being used.
Basic Installation Procedures
The following table lists the basic installation tasks in the order in which they
should be performed and shows the page numbers where the tasks are
described in more detail.
Table 2-3: ACS Basic Installation Tasks
Task Where Documented
Mount the ACS “Mounting the ACS” on page 40
Make an Ethernet connection “Making an Ethernet Connection” on page 41
Connect servers and other devices to be
managed through the ACS
“Connecting Servers and Other Devices to
ACS” on page 41
To Next Page
