Cyclades AlterPath ACS - Access; Figure 10-22:Expert > Ports > Physical Ports > Access Form

AlterPath ACS Installation, Administration, and User’s Guide 269
7. To change whether the “DCD (Data Carrier Detect) State” is disregarded
or not, select either “Disregard” or “Regard”.
8. Click “Done.”
9. Click “apply changes.”
Access
Under Ports > Physical Ports in Expert Mode, after you select one or more
serial ports, and click the Modify Port(s), select the Access form from the
tabbed menu. The following form appears.
Figure 10-22:Expert > Ports > Physical Ports > Access Form