AlterPath ACS Installation, Administration, and User’s Guide 235
4. Go to Security > Authentication> Kerberos in Expert mode.
The Kerberos form displays as shown in the following figure.
Figure 9-11:Expert > Security > Authentication > Kerberos
5. Fill in the form according to your local setup of the Kerberos server.
6. Click “apply changes.”
T To Configure a NIS Authentication Server
Perform the following procedure to configure a NIS authentication server
when ACS or any of its ports is configured to use NIS authentication method
or any of its variations (Local/NIS, NIS/Local, or NISDownLocal).
1. Go to Security > Authentication > NIS in Expert mode.
The NIS form displays as shown in the following figure.
To Next Page
