AlterPath ACS Installation, Administration, and User’s Guide 321
The following table describes the available fields and buttons in the “Backup
Config” form if “FTP” is selected.
When “Storage Device” is selected from the “Type” pull-down menu , the
following form appears.
Table 11-8: Expert > Backup Config Type FTP Form Fields and Buttons
Field Definition
Server IP IP address of an FTP server on the same subnet as the
ACS. (Verify accessibility by pinging the FTP server.)
Path and
Filename
Path of a directory on the FTP server where you have
write access for saving the backup copy of the
configuration file. Specify a filename if you want to
save the file under another name. For example, to save
the configuration file zvmppccs.0720_qa.acs-
k26 in a directory called “/upload” on the FTP
server, you would enter the following in the “Path and
Filename” field:
/upload/zvmppccs.0720_qa.acs-k26
Username and
Password
Obtain the user name and password to use from the
FTP server’s administrator.
Save Saves the configuration
Load Downloads a previously saved copy of the
configuration file from the selected device.
To Next Page
Loading...
