Ports Menu & Forms
300
Rx Bytes
Data received.
Frame
A formatted packet of data usually associated
with the Data-Link layer.
Parity
Error checking bit appended to a data packet.
A method of checking the accuracy of
transmitted characters. Parity is usually
not used, but can be odd or even. A None
parity means that data has not exchanged.
Break
An out-of-band signal on an RS-232 serial
port that involves making the Tx data line
active for more than two whole character
times (or about 2ms on a 9600bps line).
Overrun
The amount of time it takes for the new data
to overwrite the older unread data.
Column Name Description
To Next Page
Loading...
