1‑106
Chapter 1 Troubleshooting
Version 2 2007.05.22
A
Checking the printer
setting
No
Yes
If there are [Disable] items,
reset to the [Enable].
The error occurs again
after setting, go to next
step.
Checking the engine
version
No
Yes
Download the engine
firmware from the DELL
web site and upgrade the
engine firmware.
Are all the protocols
setting the [Disable]?
Checked by the [System
settings] of the [Repots] on the
[Setup].
LPD/Port 9100/
FTP/SNMP
Is the [Engine
Version] 05.08.00 or later?
Checked by [System
Settings] of [Reports] on
[Set up].
Checking the error
Does the
error still occur
when turning off and
on the power or
printing?
NoYes
Replace the PWBA
ESS. (Removal 61/
Replacement 61)
End.
If the error occur again,
replace the PWBA ESS.
To Next Page
Loading...
