1‑50
Chapter 1 Troubleshooting
Version 2 2007.05.22
007-369 Printer
Restart Printer
Contact Support
If Message Returns
<IOT Motor Failure>
007-341, 007-342, 007-343 and 007-344 errors occurred.
FIP-1. 9
FIP-1. 10
FIP-1. 11
FIP-1. 12
007-370 Printer
Restart Printer
Contact Support
If Message Returns
<IOT Motor Failure>
007-340, 007-341, 007-342, 007-343 and 007-344 errors
occurred.
FIP-1. 8
FIP-1. 9
FIP-1. 10
FIP-1. 11
FIP-1. 12
009-360 Printer
Restart Printer
Reseat Y Cart.
Contact Support
<IOT (Y) Toner CRUM Error>
Yellow Toner CRUM communication error is detected.
FIP-1. 13
009-361 Printer
Restart Printer
Reseat M Cart.
Contact Support
<IOT (M) Toner CRUM Error>
Magenta Toner CRUM communication error is detected.
FIP-1. 13
009-362 Printer
Restart Printer
Reseat C Cart.
Contact Support
<IOT (C) Toner CRUM Error>
Cyan Toner CRUM communication error is detected.
FIP-1. 13
009-363 Printer
Restart Printer
Reseat K Cart.
Contact Support
<IOT (K) Toner CRUM Error>
Black Toner CRUM communication error is detected.
FIP-1. 13
009-654 Printer
Restart Printer
Contact Support
If Message Returns
<IOT ADC Sensor Error>
ADC sensor sensed the high density.
FIP-1. 14
009-655 Printer
Restart Printer
Contact Support
If Message Returns
<IOT ADC Sensor Error>
ADC sensor sensed the low density.
FIP-1. 15
010-317 Printer
Restart Printer
Reseat Fuser
Contact Support
<IOT Fuser Detached>
Fuser detached is detected.
FIP-1. 16
010-351 Printer
Replace Fuser
Replace
Fuser
<IOT Fuser Life Over>
Fuser Life Over is detected.
FIP-1. 17
010-354 Printer
Restart Printer
Contact Support
If Message Returns
<IOT environment Sensor Error>
Temperature Sensor Error is detected.
FIP-1. 18
010-377 Printer
Restart Printer
Reseat Fuser
Contact Support
<IOT Fuser Failure>
The NC sensor circuit is defective in the MCU.
NC: No Contact
FIP-1. 19
Error Message Error Contents
Relevant
FIP
To Next Page
Loading...
