Dell 3115CN - Page 77

1‑51
Chapter 1 Troubleshooting
Version 1 2006.11.21
010-378 Printer
Restart Printer
Reseat Fuser
Contact Support
<IOT Fuser Failure>
The circuit of the NC sensor is opened.
NC: No Contact
FIP-1. 19
010-379 Printer
Restart Printer
Reseat Fuser
Contact Support
<IOT Fuser Failure>
The output value of the NC sensor is the abnormal value.
NC: No Contact
FIP-1. 19
010-380 Printer
Restart Printer
Reseat Fuser
Contact Support
<IOT Fuser Failure>
The circuit of the NC sensor is opened.
NC: No Contact
FIP-1. 19
010-381 Printer
Restart Printer
Reseat Fuser
Contact Support
<IOT Fuser Failure>
The output value of the NC sensor is the abnormal value.
NC: No Contact
FIP-1. 19
010-382 Printer
Restart Printer
Reseat Fuser
Contact Support
<IOT Fuser Failure>
NC sensor or ST sensor sensed high temp.
NC: No contact/ST: Soft Touch
FIP-1. 19
010-383 Printer
Restart Printer
Reseat Fuser
Contact Support
<IOT Fuser Failure>
NC sensor or ST sensor sensed high temp.
NC: No contact/ST: Soft Touch
FIP-1. 19
010-384 Printer
Restart Printer
Reseat Fuser
Contact Support
<IOT Fuser Failure>
In the correction of the NC sensor output value, it became the
abnormal value.
NC: No Contact
FIP-1. 19
010-385 Printer
Restart Printer
Reseat Fuser
Contact Support
<IOT Fuser Failure>
NC sensor sensed high temp.
NC: No contact
FIP-1. 19
010-386 Printer
Restart Printer
Reseat Fuser
Contact Support
<IOT Fuser Failure>
The circuit of the ST sensor is opened.
ST: Soft Touch
FIP-1. 19
010-387 Printer
Restart Printer
Reseat Fuser
Contact Support
<IOT Fuser Failure>
ST sensor sensed high temp.
ST: Soft Touch
FIP-1. 19
010-388 Printer
Restart Printer
Reseat Fuser
Contact Support
<IOT Fuser Failure>
ST sensor sensed low temp.
ST: Soft Touch
FIP-1. 19
010-389 Printer
Restart Printer
Reseat Fuser
Contact Support
<IOT Fuser Failure>
NC sensor sensed low temp.
NC: No Contact
FIP-1. 19
Error Message Error Contents
Relevant
FIP