Dell 3115CN - Page 78

1‑52
Chapter 1 Troubleshooting
Version 2 2007.05.22
010-390 Printer
Restart Printer
Reseat Fuser
Contact Support
<IOT Fuser Failure>
Fuser warming up time is longer than the specified value. (at
the printing)
FIP-1. 19
010-391 Printer
Restart Printer
Reseat Fuser
Contact Support
<IOT Fuser Failure>
Adjusting time of NC sensor is longer than the specified value.
FIP-1. 19
010-392 Printer
Restart Printer
Reseat Fuser
Contact Support
Fuser warming up time is longer than the specified value.
(standby)
FIP-1. 19
010-393 Printer
Restart Printer
Reseat Fuser
Contact Support
<IOT Fuser Failure>
ST sensor sensed high temp. and cut off the fuser power.
ST: Soft Touch
FIP-1. 19
010-394 Printer
Restart Printer
Reseat Fuser
Contact Support
<IOT Fuser Failure>
NC sensor sensed high temp. and cut off the fuser power.
NC: No Contact
FIP-1. 19
010-395 Printer
Restart Printer
Reseat Fuser
Contact Support
<IOT Fuser Failure>
Fuser power is cut off by the errors.
FIP-1. 19
010-396 Printer
Restart Printer
Reseat Fuser
Contact Support
<IOT Fuser Failure>
Fuser power is cut off by the errors.
FIP-1. 19
010-397 Printer
Restart Printer
Contact Support
If Message Returns
<IOT Fuser Failure>
Fuser power is cut off by the errors.
FIP-1. 19
016-300 Printer
Restart Printer
Contact Support
If Message Returns
<ESS Data Cache Error>
CPU data cache error.
FIP-1. 20
016-301 Printer
Restart Printer
Contact Support
If Message Returns
<ESS Instruction Cache Error>
CPU instruction cache error.
FIP-1. 20
016-302 Printer
Restart Printer
Contact Support
If Message Returns
<ESS Illegal Exception>
CPU illegal expansion.
FIP-1. 21
016-310 Printer
Restart Printer
Contact Support
If Message Returns
<ESS FontROM Error (Main)>
Checksum error in the built-in font ROM.
FIP-1. 20
Error Message Error Contents
Relevant
FIP