Dell PowerConnect 8024 - Summer Time Configuration

Configuring System Information 109
Defining the Time Zone Parameters
1. Open the Time Zone Configuration page.
2. Define the fields as needed.
3. Click Apply Changes .
The time zone settings are modified, and the device is updated.
Configuring Time Zone Settings Using CLI Commands
For information about the CLI commands that perform this function, see the Clock Commands chapter
in the
CLI Reference Guide . The following table summarizes the equivalent CLI commands you use to
configure time zone settings.
Summer Time Configuration
Use the Summer Time Configuration page to specify a defined summer time duration and offset.
To display the Summer Time Configuration page, click System
→ General → Summer Time
Configuration in the tree view.
Table 6-5. Time Zone Settings Commands
CLI Command Description
clock timezone Sets the offset to Coordinated Universal Time.
no clock timezone Resets the time zone settings.