Dell PowerConnect 8024 - CP Interface Client Status; CP Client Status

Configuring System Information 203
CP Interface Client Status
Use the Interface Client Status page to view clients that are authenticated to a specific interface.
To view statistical information for clients connected to the switch through the captive portal, click
System
→ Captive Portal → Interface Client Status.
Figure 6-84. Interface - Client Status
The Interface Client Status page contains the following fields:
• Interface — The drop-down menu lists each interface on the switch. To view information about the
clients connected to a CP on this interface, select it from the list.
•
MAC Address — Identifies the MAC address of the client.
•
IP Address — Identifies the IP address of the client.
•
CP Configuration — Identifies the captive portal the client used to access the network.
•
Protocol — Shows the current connection protocol, which is either HTTP or HTTPS.
•
Verification — Shows the current account type, which is Guest, Local, or RADIUS.
CP Client Status
Use the Client Status page to view clients that are authenticated to a specific CP configuration.
To view information about clients connected to the switch through the a specific captive portal, click
System
→ Captive Portal → Client Status.