EasyManuals Logo

Dell PowerConnect 8024 User Guide

Dell PowerConnect 8024
778 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #610 background imageLoading...
Page #610 background image
610 Configuring IPv6
DHCPv6
DHCP is generally used between clients (for example hosts) and servers (for example routers) for the
purpose of assigning IP addresses, gateways, and other networking definitions such as DNS, NTP, and/or
Session Initiation Protocol (SIP) parameters. However, IPv6 natively provides for auto configuration of IP
addresses through IPv6 Neighbor Discovery Protocol (NDP) and the use of Router Advertisement
messages. Thus, the role of DHCPv6 within the network is different than that of DHCPv4 in that it is
less relied upon for IP address assignment.
There is a list of DHCP options that is commonly supported by DHCPv4 that need to be supported also
by DHCPv6, and must be configured.
NOTE: The most important DHCP option to configure is the DNS Server option, which is configured on the IPv6
DHCPv6
Pool Configuration web page.
The DHCPv6 menu page contains links to web pages that define and display DHCPv6 parameters and
data. To display this page, click IPv6
DHCPv6 in the tree view. Following are the web pages accessible
from this menu page:
DHCPv6 Global Configuration
DHCPv6 Pool Configuration
Prefix Delegation Configuration
DHCPv6 Pool Summary
DHCPv6 Interface Configuration
DHCPv6 Server Bindings Summary
•DHCPv6 Statistics
DHCPv6 Global Configuration
Use the DHCPv6 Global Configuration
page to configure DHCPv6 global parameters. To display the
page, click IPv6
DHCPv6
Global Configuration in the tree view.

Table of Contents

Other manuals for Dell PowerConnect 8024

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell PowerConnect 8024 and is the answer not in the manual?

Dell PowerConnect 8024 Specifications

General IconGeneral
Switching Capacity480 Gbps
StackableYes
Device TypeSwitch
Enclosure TypeRack-mountable
Power RedundancyOptional
Width17.3 in
Height1.7 in
Jumbo Frame SupportYes
Ports24 x 10 Gigabit SFP+
ManagementWeb-based GUI, Command Line Interface (CLI), SNMP
VLAN SupportYes
Power SupplyInternal
Routing ProtocolStatic routing
FeaturesQuality of Service (QoS), VLAN support
Compliant StandardsIEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z
Operating Temperature0 to 45 °C
Storage Temperature-20 to 70 °C
Relative Humidity10% to 90% (non-condensing)
MAC Address Table Size32, 000 entries

Related product manuals