Viewing Statistics and Remote Monitoring 465
Viewing Interface Utilization Statistics Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
• RMON Commands
The following table summarizes the equivalent CLI commands for this feature.
Counter Summary
Use the
Counter Summary
page to display interface utilization statistics in numeric sums as opposed to
percentages.
To display the page, click Statistics/RMON
→
Table Views
→
Counter Summary in the tree view.
Figure 8-6. Counter Summary
The Counter Summary page contains the following fields:
•
Unit
— Specifies the unit for which statistics are displayed.
•
Refresh Rate
— Specifies amount of time that passes before statistics are refreshed. The possible field
values are No Refresh, 15, 30, and 60 seconds. Default is No Refresh.
•
Interface
— Specifies the interface for which statistics are displayed.
Table 8-5. Utilization Summary Commands
CLI Command Description
show rmon statistics Displays RMON Ethernet Statistics.
To Next Page
Loading...
