Dell PowerConnect 8024 User Guide

384 Configuring Switching Information
• IGMP Snooping Querier Commands
The following table summarizes the equivalent CLI commands for this feature.
VLAN Querier
Use the VLAN Querier page to specify the IGMP Snooping Querier settings for individual VLANs.
To display the VLAN Querier page, click Switching
→ Multicast Support → IGMP Snooping → VLAN
Querier in the tree view.
Figure 7-80. VLAN Querier
Table 7-43. IGMP Snooping Querier Global Commands
CLI Command Description
ip igmp snooping querier Enables/disables IGMP Snooping Querier on the system (Global
Configuration mode) or on a VLAN.
ip igmp snooping querier election
participate
Enables the Snooping Querier to participate in the Querier Election
process when it discovers the presence of another Querier in the
VLAN.
ip igmp snooping querier query-interval Sets the IGMP Querier Query Interval time.
ip igmp snooping querier timer expiry Sets the IGMP Querier timer expiration period.
ip igmp snooping querier version Sets the IGMP version of the query that the snooping switch is going
to send periodically.
show igmp snooping querier Displays IGMP Snooping Querier information.

Dell PowerConnect 8024 Specifications

General

Switching Capacity	480 Gbps
Stackable	Yes
Device Type	Switch
Enclosure Type	Rack-mountable
Power Redundancy	Optional
Width	17.3 in
Height	1.7 in
Jumbo Frame Support	Yes
Ports	24 x 10 Gigabit SFP+
Management	Web-based GUI, Command Line Interface (CLI), SNMP
VLAN Support	Yes
Power Supply	Internal
Routing Protocol	Static routing
Features	Quality of Service (QoS), VLAN support
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z
Operating Temperature	0 to 45 °C
Storage Temperature	-20 to 70 °C
Relative Humidity	10% to 90% (non-condensing)
MAC Address Table Size	32, 000 entries