200 Configuring System Information
•
Configuration Name
— Select the CP configuration with the information to view.
•
Operational Status
— Shows whether the portal is active on the specified interface.
•
Disable Reason
— If the selected CP is disabled on this interface, this field indicates the reason, which
can be one of the following:
– Interface Not Attached
– Disabled by Administrator
•
Blocked Status
— Indicates whether the captive portal is temporarily blocked for authentications.
•
Authenticated Users
— Displays the number of authenticated users using the captive portal instance
on this interface.
Interface Capability Status
The Interface Capability Status page contains information about interfaces that can have CPs
associated with them. The page also contains status information for various capabilities. Specifically, this
page indicates what services are provided through the CP to clients connected on this interface. The list
of services is determined by the interface capabilities.
To view interface activation status information, click System
→
Captive Portal
→
Interface Capability
Status.
Figure 6-81. Interface Capability Status
The Interface Capability Status page contains the following fields:
To Next Page
Loading...
