602 Configuring IPv6
Interface Summary
Use the Interface Summary
page to display settings for all IPv6 interfaces.
To display the page, click IPv6
→
Interface Summary in the tree view.
Figure 10-3. IPv6 Interface Summary
The IPv6 Interface Summary page contains the following fields:
•
Interface
— Specifies the interface whose settings are displayed in the current table row.
•
Routing Mode
— Specifies routing mode of the interface.
•
Admin Mode
— Specifies administrative mode of the interface.
•
Operational Mode
— Specifies operational mode of the interface.
•
IPv6 Prefix/PrefixLength
— Specifies configured IPv6 addresses on the interface.
•
State
— Specifies whether the interface is active or not.
Displaying IPv6 Interface Summary Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
• IPv6 Routing Commands
The following table summarizes the equivalent CLI commands for this feature.
To Next Page
Loading...
