112 Configuring System Information
Figure 6-7. Clock Detail
The Clock Detail page provides information about the following clock features:
•
Current Time
— This section allows you to set the current time and date.
•
Time Zone
— This section displays the time zone settings.
•
Summertime
— This section displays the summer time settings.
Displaying Clock Detail Using CLI Commands
For information about the CLI commands that perform this function, see the
Clock Commands
chapter
in the
CLI Reference Guide
. The following table summarizes the equivalent CLI commands you use to
display clock detail information.
Reset
Use the Reset page to reset the device.
To display the Reset page, click System
→
General
→
Reset in the tree view.
Table 6-7. Clock Detail Commands
CLI Command Description
clock set Sets the current date and time.
show clock Displays the time and date of the system clock.
To Next Page
Loading...
