Dell PowerConnect 8024 - DHCP Snooping Persistent Configuration

436 Configuring Switching Information
Configuring DHCP Snooping VLANs With CLI Commands
For information about the CLI commands that perform this function, refer to the following chapter in
the
CLI Reference Guide :
• DHCP Snooping Commands
The following table summarizes the equivalent CLI commands for this feature.
DHCP Snooping Persistent Configuration
Use the DHCP Snooping Persistent Configuration page to configure the persistent location of the
DHCP snooping database. This location can be local or remote on a given IP machine. For more
information about DHCP bindings and the DHCP Snooping database, see "DHCP Snooping Static
Bindings Configuration" on page 437.
To access the DHCP Snooping Persistent Configuration page, click Switching
→ DHCP Snooping →
Persistent Configuration in the navigation tree.
Figure 7-119. DHCP Snooping Persistent Configuration
The DHCP Snooping Persistent Configuration page contains the following fields:
Table 7-67. DHCP Snooping VLAN Commands
CLI Command Description
ip dhcp snooping Enables DHCP snooping globally or on a specific VLAN.