Viewing Statistics and Remote Monitoring 471
Viewing RMON History Control Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
• RMON Commands
The following table summarizes the equivalent CLI commands for this feature.
RMON History Table
Use the RMON History Table page to display interface-specific statistical network samplings. Each table
entry represents all counter values compiled during a single sample.
To display the RMON History Table page, click Statistics/RMON
→
RMON
→
History Table in the tree
view.
Figure 8-11. RMON History Table
The RMON History Table page contains the following fields:
•
History Entry No.
— Selects the history entry number to display on the RMON
History Table
.
•
Owner
— Displays RMON statistics group owner name, if available.
•
Source Interface
— Indicates the Interface or LAG where the statistics are being collected.
•
Max No. of Samples to Keep
— Determines the length of the list in the History table for each History
Entry No.
Table 8-8. RMON History Control Commands
CLI Command Description
rmon collection history Enables a Remote Monitoring (RMON) MIB history statistics group
on an interface.
To Next Page
Loading...
