Configuring Switching Information 411
Figure 7-101. LLDP-MED Interface Summary
Configuring LLDP-MED Interface Settings with CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide:
• LLDP Commands
The following table summarizes the equivalent CLI commands for this feature.
LLDP-MED Local Device Information
Use the LLDP-MED Local Device Information page to view the advertised LLDP local data for each
port.
Table 7-54. LLDP MED Interface Commands
CLI Command Description
lldp med Enables/disables LLDP-MED on an interface.
lldp med confignotification Enables sending the topology change notification.
lldp med transmit-tlv Specifies which optional TLVs in the LLDP MED set are transmitted
in the LLDPDUs.
show lldp med interface Displays a summary of the current LLDP MED configuration for a
specific interface.
To Next Page
Loading...
