Dell PowerConnect 8024 User Guide

260 Configuring System Information
The ISDP Statistics page contain the following fields:
• Packets Received — Displays the number of all ISDP protocol data units (PDUs) received.
•
Packets Transmitted — Displays the number of all ISDP PDUs transmitted.
•
ISDPv1 Packets Received — Displays the number of v1 ISDP PDUs received.
•
ISDPv1 Packets Transmitted — Displays the number of v1 ISDP PDUs transmitted.
•
ISDPv2 Packets Received — Displays the number of v2 ISDP PDUs received.
•
ISDPv2 Packets Transmitted — Displays the number of v2 ISDP PDUs transmitted.
•
Bad Header — Displays the number of ISDP PDUs that were received with bad headers.
•
Checksum Error — Displays the number of ISDP PDUs that were received with checksum errors.
•
Transmission Failure — Displays the number of ISDP PDUs transmission failures.
•
Invalid Format Packets Received — Displays the number of ISDP PDUs that were received with an
invalid format.
•
Table Full — Displays the number of times the system tried to add an entry to the ISDP table but was
unsuccessful because the table was full.
•
ISDP IP Address Table Full — Displays the number of times the system tried to add an entry to the
ISDP IP Address table but was unsuccessful because the table was full.
Displaying ISDP Statistics Using CLI Commands
For information about the CLI commands that perform this function, see the CDP Interoperability
Commands chapter in the
CLI Reference Guide . The following table summarizes the equivalent CLI
commands you use to view ISDP.
iSCSI Optimizations
Internet Small Computer System Interface (iSCSI) flow acceleration provides a means of giving traffic
between an iSCSI initiator and target systems special Quality of Service treatment in the switch. This is
accomplished by monitoring, or snooping, traffic to detect packets used by iSCSI stations in establishing
iSCSI sessions and connections. Data from these exchanges is used to create classification rules to assign
the traffic between the stations to a configured traffic class. The traffic classification affects how the
packets in the flow are queued and scheduled for egress on the destination port.
Table 6-65. ISDP Statistics Commands
CLI Command Description
clear isdp counters Clears the ISDP counters.
show isdp traffic Displays ISDP statistics.

Dell PowerConnect 8024 Specifications

General

Switching Capacity	480 Gbps
Stackable	Yes
Device Type	Switch
Enclosure Type	Rack-mountable
Power Redundancy	Optional
Width	17.3 in
Height	1.7 in
Jumbo Frame Support	Yes
Ports	24 x 10 Gigabit SFP+
Management	Web-based GUI, Command Line Interface (CLI), SNMP
VLAN Support	Yes
Power Supply	Internal
Routing Protocol	Static routing
Features	Quality of Service (QoS), VLAN support
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z
Operating Temperature	0 to 45 °C
Storage Temperature	-20 to 70 °C
Relative Humidity	10% to 90% (non-condensing)
MAC Address Table Size	32, 000 entries