Dell PowerConnect 8024 - LLDP-MED Remote Device Information

414 Configuring Switching Information
Viewing LLDP-MED Local Device Information with CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide:
• LLDP Commands
The following table summarizes the equivalent CLI commands for this feature.
LLDP-MED Remote Device Information
Use the LLDP-MED Remote Device Information page to view the advertised LLDP data advertised by
remote devices.
To display the LLDP-MED Remote Device Information page, click Switching
→ LLDP → LLDP-MED →
LLDP-MED Remote Device Information in the tree view.
Figure 7-103. LLDP-MED Remote Device Information
The LLDP-MED Remote Device Information page contains the following fields:
• Local Interface — Specifies the list of all the ports on which LLDP-MED is enabled.
Table 7-55. LLDP-MED Local Device Information Command
CLI Command Description
show lldp med local-device Displays the advertised LLDP local data.