Configuring Switching Information 389
MRouter Status
Use the MRouter Status page to display the status of dynamically learned multicast router interfaces.
To access this page, click Switching
→
Multicast Support
→
MRouter Status in the navigation tree.
Figure 7-85. MRouter Status
The MRouter Status page contains the following fields:
•
Interface
— Select the interface for which you want to display the status.
•
VLAN ID —
Displays the dynamically learned multicast router interfaces.
Viewing Mrouter Status with CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide:
• IGMP Snooping
The following table summarizes the equivalent CLI commands for this feature.
Table 7-45. Mrouter Status Command
CLI Command Description
show ip igmp snooping mrouter Displays information on dynamically learned Multicast router
interfaces.
To Next Page
Loading...
