Configuring System Information 123
•Log File
• Remote Log Server Settings
Global Settings
Use the Global Settings page to enable logs globally, and to define log parameters. The Severity log
messages are listed from the highest severity to the lowest.
To display the Global Settings page, click System
→
Logs
→
Global Settings in the tree view.
Figure 6-16. Global Settings
The Global Settings page contains the following fields:
•
Logging
— Enables device global logs for Cache, File, and Server Logs. All logs which are printed to
the console are saved to the log files. The possible field values are:
–
Enable —
Enables saving logs in Cache (RAM), File (FLASH), and an External Server.
–
Disable
— Disables saving logs. It is not possible to disable logging of logs that are printed to
console.
Severity
Use the check boxes in this section to adjust the sensitivity of the console, persistent memory, and log
files.
To Next Page
Loading...
