258 Configuring System Information
•
ISDP Mode
— Use this field to enable or disable the Industry Standard Discovery Protocol on the
selected interface.
Displaying the ISDP Interface Summary Table
1.
Open the
ISDP Interface Configuration
p
age
.
2.
Click
Show All
.
The
ISDP Interface Summary
page displays:
Figure 6-126. ISDP Interface Summary
Configuring and Viewing ISDP Interfaces Using CLI Commands
For information about the CLI commands that perform this function, see the CDP Interoperability
Commands chapter in the
CLI Reference Guide
. The following table summarizes the equivalent CLI
commands you use to configure ISDP.
ISDP Statistics
From the ISDP Statistics page, you can view information about the ISDP packets sent and received by
the switch.
To access the ISDP Statistics page, click System
→
ISDP
→
Statistics in the navigation tree.
Table 6-64. ISDP Interface Commands
CLI Command Description
isdp enable (Interface Mode) Enables ISDP on an interface.
show isdp interface Displays ISDP settings for the specified interface.
To Next Page
Loading...
