Configuring System Information 127
•
Description
— The log description.
Removing Log Information
1.
Open the
Log File Table
page.
2.
Click
Clear Log
.
The log information is removed from the log file table, and the device is updated.
Removing Log Information Using CLI Commands
For information about the CLI commands that perform this function, see the
Syslog Commands
chapter
in the
CLI Reference Guide
. The following table summarizes the equivalent CLI commands you use to
remove log information.
Remote Log Server Settings
Use the Remote Log Server Settings page to view the available log servers, to define new log servers, and
to set the severity of the log events sent to the server.
To display the Remote Log Server Settings page, click System
→
Logs
→
Remote Log Server.
Table 6-13. Log File Commands
CLI Command Description
clear logging file Use to clear messages from the logging file.
show logging file Displays the state of logging and the syslog messages stored in the
logging file.
To Next Page
Loading...
