EasyManuals Logo

Dell PowerConnect 8024 User Guide

Dell PowerConnect 8024
778 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #319 background imageLoading...
Page #319 background image
Configuring Switching Information 319
Defining the Aging Time
1.
Open the
Dynamic Address Table
page.
2.
Define the
Address Aging
field.
3.
Click
Apply Changes
.
The aging time is modified, and the device is updated.
Querying the Dynamic Address Table
1.
Open the
Dynamic Address Table
page.
2.
Define the parameter by which to query the
Dynamic Address Table
.
Entries can be queried by
Interface
,
LAG
,
MAC Address
, or
VLAN ID
.
3.
Click
Query
to query the Dynamic Address Table.
Removing Data From the Dynamic Address Table
1.
Open the
Dynamic Address Table
page.
2.
Check
Clear Table
.
3.
Click
Apply Changes
.
The
Dynamic Address Table is cleared of all data.
Querying and Sorting Dynamic Addresses Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
Address Table Commands
The following table summarizes the equivalent CLI commands for this feature.
Configuring GARP
Generic Attribute Registration Protocol (GARP) is a general-purpose protocol that registers any network
connectivity or membership-style information. GARP defines a set of switches interested in a given
network attribute, such as VLAN or multicast address. The GARP Timers page is accessible from the
GARP menu page.
Table 7-19. Dynamic Address Table Commands
CLI Command Description
show bridge address-table Displays dynamically created entries in the bridge forwarding database.
bridge aging-time Sets the aging time of the address.
clear bridge Removes any learned entries from the forwarding database.

Table of Contents

Other manuals for Dell PowerConnect 8024

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell PowerConnect 8024 and is the answer not in the manual?

Dell PowerConnect 8024 Specifications

General IconGeneral
Switching Capacity480 Gbps
StackableYes
Device TypeSwitch
Enclosure TypeRack-mountable
Power RedundancyOptional
Width17.3 in
Height1.7 in
Jumbo Frame SupportYes
Ports24 x 10 Gigabit SFP+
ManagementWeb-based GUI, Command Line Interface (CLI), SNMP
VLAN SupportYes
Power SupplyInternal
Routing ProtocolStatic routing
FeaturesQuality of Service (QoS), VLAN support
Compliant StandardsIEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z
Operating Temperature0 to 45 °C
Storage Temperature-20 to 70 °C
Relative Humidity10% to 90% (non-condensing)
MAC Address Table Size32, 000 entries

Related product manuals