Dell PowerConnect 8024 User Guide

Configuring IPv6 617
• DNS Server — Displays the IPv6 address of the associated DNS server.
•
Domain Name — Displays the DNS domain name.
•
Host IP Address — Displays the IPv6 address and mask length for the delegated prefix.
•
DUID — Identifier used to identify the client's unique DUID value.
•
Va l i d L i f e t i m e — Displays the valid lifetime in seconds for delegated prefix.
•
Prefer Lifetime — Displays the preferred lifetime in seconds for delegated prefix.
Displaying the Pool Summary Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide :
• DHCPv6 Commands
The following table summarizes the equivalent CLI commands for this feature.
DHCPv6 Interface Configuration
Use the DHCPv6 Interface Configuration page to configure a DHCPv6 interface.
To display the page, click IPv6
→ DHCPv6 → Interface Configuration in the tree view.
Table 10-9. DHCPv6 Pool Summary Command
CLI Command Description
show ipv6 dhcp pool Displays the configured DHCP pool.

Dell PowerConnect 8024 Specifications

General

Switching Capacity	480 Gbps
Stackable	Yes
Device Type	Switch
Enclosure Type	Rack-mountable
Power Redundancy	Optional
Width	17.3 in
Height	1.7 in
Jumbo Frame Support	Yes
Ports	24 x 10 Gigabit SFP+
Management	Web-based GUI, Command Line Interface (CLI), SNMP
VLAN Support	Yes
Power Supply	Internal
Routing Protocol	Static routing
Features	Quality of Service (QoS), VLAN support
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z
Operating Temperature	0 to 45 °C
Storage Temperature	-20 to 70 °C
Relative Humidity	10% to 90% (non-condensing)
MAC Address Table Size	32, 000 entries