Dell PowerConnect 8024 - Retrieve Event Log Using XMODEM; Load New Operational Code Using XMODEM

Configuring Dell™ PowerConnect™ 85
1 - 1200
2 - 2400
3 - 4800
4 - 9600
5 - 19200
6 - 38400
7 - 57600
8 - 115200
0 - no change
NOTE: The selected baud rate takes effect immediately.
2. The boot process resumes.
Retrieve Event Log using XMODEM
Use option 3 to retrieve the event log and download it to your ASCII terminal.
To retrieve the event log from the Boot menu:
1.
On the Boot menu, select 3 and press <Enter>.
The following prompt displays:
[Boot Menu] 3
Sending event log, start XMODEM receive.....
File asciilog.bin Ready to SEND in binary mode
Estimated File Size 169K, 1345 Sectors, 172032 Bytes
Estimated transmission time 3 minutes 20 seconds
Send several Control-X characters to cancel before transfer starts.
2.
The boot process resumes.
Load New Operational Code Using XMODEM
Use option 4 when a new software version must be downloaded to replace corrupted files, update, or
upgrade the system software.
To download software from the Boot menu:
1.
On the Boot menu, select 4 and press <Enter>.
The following prompt displays:
[Boot Menu] 4