Dell PowerConnect 8024 - RMON Event Log

Viewing Statistics and Remote Monitoring 475
Displaying the RMON Event Control Table
1. Open the RMON Event Control page.
2. Click Show All .
The
Event Control Table displays.
Figure 8-14. Event Control Table
Removing RMON Event Entries
1. Open the RMON Event Control page.
2. Choose the event to remove from the drop-down menu in the Event Entry field and check Remove.
3. Click Apply Changes .
The table entry is removed, and the device is updated.
Defining Switch Events Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide :
• RMON Commands
The following table summarizes the equivalent CLI commands for this feature.
RMON Event Log
Use the RMON Event Log page to display a list of RMON events.
To display the page, click Statistics/RMON
→ RMON → Events Log in the tree view.
Table 8-10. RMON Event Control Command
CLI Command Description
rmon event Configures events.