426 Configuring Switching Information
Configuring Dynamic ARP Inspection DAI ACL With CLI Commands
For information about the CLI commands that perform this function, refer to the following chapter in
the
CLI Reference Guide
:
• Dynamic ARP Inspection Commands
The following table summarizes the equivalent CLI commands for this feature.
DAI ACL Rule Configuration
Use the DAI ARP ACL Rule Configuration page to add or remove DAI ARP ACL Rules.
To display the DAI ARP ACL Rule Configuration page, click Switching
→
Dynamic ARP Inspection
→
ACL Rule Configuration in the navigation tree.
Figure 7-111. Dynamic ARP Inspection Rule Configuration
The Dynamic ARP Inspection Rule Configuration page contains the following fields:
•
ARP ACL Name
— Select the ARP ACL for which information is to be displayed or configured.
Table 7-61. Dynamic ARP Inspection DAI ACL Commands
CLI Command Description
arp access-list Creates an ARP ACL.
show arp access-list Displays the configured ARP ACLs with the rules.
To Next Page
Loading...
