202 Configuring System Information
•
MAC Address
— Identifies the MAC address of the client (if applicable).
•
IP Address
— Identifies the IP address of the client (if applicable).
•
User
— Displays the user name (or Guest ID) of the connected client.
•
Protocol
— Shows the current connection protocol, which is either HTTP or HTTPS.
•
Verification
— Shows the current account type, which is Guest, Local, or RADIUS.
To force the captive portal to disconnect an authenticated client, select the Remove check box next to
the client MAC address and click Apply Changes. To disconnect all clients from all captive portals, click
Delete All.
Client Detail
The Client Detail page shows detailed information about each client connected to the network through
a captive portal.
To view detailed information about the clients connected to the switch through the captive portal, click
System
→
Captive Portal
→
Client Detail.
Figure 6-83. Client Detail
The Client Detail page contains the following fields:
•
MAC Address —
The menu lists each associated client by MAC address. To view status information
for a different client, select its MAC address from the list.
•
Client IP Address
— Identifies the IP address of the client (if applicable).
•
CP Configuration
— Identifies the CP configuration the client is using.
•
Protocol
— Shows the current connection protocol, which is either HTTP or HTTPS.
•
Session Time
— Shows the amount of time that has passed since the client was authorized.
•
User Name
— Displays the user name (or Guest ID) of the connected client.
•
Interface
— Identifies the interface the client is using.
•
Verification
— Shows the current account type, which is Guest, Local, or RADIUS.
To Next Page
Loading...
Need help?
General
