446 Configuring Switching Information
The
DHCP Relay Interface
Summary
table
displays.
Figure 7-127. DHCP Relay Interface Summary
Configuring DHCP Relay With CLI Commands
For information about the CLI commands that perform this function, refer to the following chapter in
the
CLI Reference Guide
:
• L2 DHCP Relay Agent Commands
The following table summarizes the equivalent CLI commands for this feature.
DHCP Relay Interface Statistics
Use this page to display statistics on DHCP Relay requests received on a selected port. To access this
page, click Switching
→
DHCP Relay
→
Interface Statistics in the tree view.
Table 7-73. DHCP Relay Interface Configuration Commands
CLI Command Description
dhcp l2relay Enables the Layer 2 DHCP Relay agent for an interface.
dhcp l2relay trust Configures an interface to trust a received DHCP Option 82.
To Next Page
Loading...
