Dell PowerConnect 8024 - LLDP-MED Interface Configuration

Configuring Switching Information 409
• LLDP Commands
The following table summarizes the equivalent CLI commands for this feature.
LLDP-MED Interface Configuration
Use the LLDP-MED Interface Configuration page to specify LLDP-MED parameters that affect a
specific interface.
To display the LLDP-MED Interface Configuration page, click Switching
→ LLDP → LLDP-MED →
LLDP-MED Interface Configuration in the tree view.
Figure 7-100. LLDP-MED Interface Configuration
The LLDP-MED Interface Configuration page contains the following fields:
• Interface — Specifies the list of ports on which LLDP-MED - 802.1AB can be configured. Select the
All option list to configure all interfaces on the system with the same LLDP-MED settings.
Table 7-53. LLDP-MED Global Commands
CLI Command Description
lldp med faststartrepeatcount Sets the value of the fast start repeat count.
show lldp med Displays a summary of the current LLDP MED configuration.
lldp med confignotification Enables sending the topology change notifications.
lldp med transmit-tlv Spruciest which optional TLVs in the LLDP MED set are transmitted
in the LLDPDUs.