Dell PowerConnect 8024 - Page 152

152 Configuring System Information
3. Select one or more Optional Methods by using the arrows.
4. Click Apply Changes .
The user authentication profile is updated to the device.
Removing an Authentication Profiles Entry
1. Open the Authentication Profiles page.
2. Click Show All .
The
Authentication Profiles Table opens.
Figure 6-43. Authentication Profiles Table
3. Check the Remove check box next to the profile to be removed.
4. Click Apply Changes .
The entry is removed.
Configuring an Authentication Profile Using CLI Commands
For information about the CLI commands that perform this function, see the AAA Commands chapter
in the
CLI Reference Guide : The following table summarizes the equivalent CLI commands you use.