Dell PowerConnect 8024 - Page 194

194 Configuring System Information
Figure 6-74. User Group
The User Group page contains the following fields:
• Group Name — The menu contains the name of all of the groups configured on the system. The
Default user group is configured by default. New users are assigned to the 1-Default user group by
default. To delete a user group, select the name of the group from the Group Name menu, select the
Remove option, and then click Apply Changes .
•
Rename — To rename a Group Name, click the check box, type a new group name from 1 to 31
alphanumeric characters in the
Rename field, then click Apply Changes .
Adding a User Group
1. Open the User Group page.
2. Click Add .
The
Add Local User page displays:
Figure 6-75. Add User Group
3. Enter a name for the new group.
4. Click Apply Changes .
The group is added, and the device is updated.