Dell PowerConnect 8024 - Page 212

212 Configuring System Information
– auth nopriv — Authenticates SNMP messages without encrypting them.
–
auth priv — Authenticates SNMP messages and encrypts them.
•
Context Prefix (1 – 30) — This field permits the user to specify the context name by entering the first 1
to 30 characters of the context name.
•
Operation — Defines group access rights. The possible field values are:
–
Read — Select a view that restricts management access to viewing the contents of the agent. If no
view is selected, all objects except the community-table, SNMPv3 user and access tables can be
viewed.
–
Write — Select a view that permits management read-write access to the contents of the agent.
–
Notify — Select a view that permits sending SNMP traps or informs.
Adding SNMP Groups
1. Open the Access Control Configuration page.
2. Click Add .
The
Add an Access Control Configuration page displays :
Figure 6-91. Add an Access Control Configuration
3. Define the fields as needed.
4. Click Apply Changes .
The group is added, and the device is updated.
Displaying the Access Table
1. Open the Access Control Configuration page.
2. Click Show All .
The
Access Table page displays: