Dell PowerConnect 8024 - Page 219

Configuring System Information 219
In addition to the fields in the SNMPv1, 2 Community page, the Add SNMPv1,2 Community page
contains the
All (0.0.0.0) field, which indicates that the community can be used from any
management station.
4. Click Apply Changes .
The new community is saved, and the device is updated.
Displaying Communities
1. Open the SNMPv1, 2 Community page.
2. Click Show All .
The
Basic and Advanced Table page displays.
Figure 6-99. Basic and Advanced Table
Removing Communities
1. Open the SNMPv1, 2 Community page.
2. Click Show All .
The
Basic and Advanced Table page displays.
3. Select a community and check the Remove check box.
4. Click Apply Changes .
The community entry is removed, and the device is updated.