242 Configuring System Information
Figure 6-114. OSPFv3 Trap Flags
The OSPFv3 Trap Flags page contains the following fields:
•Error Traps
–
Bad Packet
— Signifies that an OSPF packet has been received on a non-virtual interface that
cannot be parsed. The factory default is disabled.
–
Configuration Error
— Signifies that a packet has been received on a non-virtual interface from a
router with configuration parameters that conflict with this router's configuration parameters. The
factory default is disabled.
–
Virtual Bad packet
— Signifies that an OSPF packet has been received on a virtual interface that
cannot be parsed. The factory default is disabled.
–
Virtual Link Configuration Error
— Signifies that a packet has been received on a virtual
interface from a router with configuration parameters that conflict with this router's configuration
parameters. The factory default is disabled.
•LSA Traps
To Next Page
Loading...
