250 Configuring System Information
Figure 6-119. sFlow Sampler Configuration
The sFlow Sampler Configuration page contains the following fields:
•
Sampler DataSource
— The sFlow data source for this sFlow sampler. This Agent supports physical
ports only.
•
Receiver Index
— The sFlow Receiver for this sFlow sampler. If set to zero, no packets will be sampled.
Only active receivers can be set. If a receiver expires, then all samplers associated with the receiver will
also expire. The allowed range is 1 to 8.
•
Sampling Rate
— The statistical sampling rate for packet sampling from this source. A sampling rate
of zero (0) disables sampling. The allowed range is 1024 to 65536.
•
Maximum Header Size
— The maximum number of bytes that should be copied from a sampled
packet. The allowed range is 20 to 256.
Displaying the sFlow Sampler Summary Table
1.
Open the
sFlow Sampler Configuration
p
age
.
2.
Click
Show All
.
The
sFlow Sampler Summary
page displays:
To Next Page
Loading...
