Configuring Switching Information 269
Figure 7-1. Dot1x Authentication
The Dot1x Authentication page contains the following fields:
Global Parameters
•
Administrative Mode
— Permits 802.1X port-based authentication on the switch. The possible field
values are:
–
Enable
— Enables 802.1X authentication on the switch.
–
Disable
— Disables 802.1X authentication on the switch.
•
Authentication Method
— Selects the Authentication method used. The possible field values are:
–
Unconfigured
— Indicates that an authentication method has not been selected.
To Next Page
Loading...
