Dell PowerConnect 8024 - Page 301

Configuring Switching Information 301
Figure 7-21. Port Configuration Table
3. Use the Unit drop-down menu to view the Port Configuration Table for other units in the stack, if
they exist.
Copying Port Configuration Settings
1. Open the Port Configuration page.
2. Click Show All .
The
Port Configuration Table displays.
3. Specify the Unit and Port you are copying from in Copy Parameters From .
4. Click Copy To for each Port to receive these parameters.
5. Click Apply Changes .
The Port Configuration settings are copied, and the device is updated.
Modifying Port Configuration Settings for Multiple Ports
1. Open the Port Configuration page.
2. Click Show All .
The
Port Configuration Table displays.
3. Click Edit for each Port to modify.
4. Edit the Port Configuration fields as needed.
5. Click Apply Changes .
The Port Configuration settings are modified, and the device is updated.
Configuring Ports with CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide :
• Ethernet Configuration Commands