340 Configuring Switching Information
• VLAN 1 is the default VLAN of which all ports are members, and
• VLAN 4095 is designated as the "Discard VLAN."
Valid VLANs that can be created are 2–4093. VLAN 4094 is reserved.
To display the VLAN Membership page, click Switching
→
VLAN
→
VLAN Membership in the tree
view.
Figure 7-49. VLAN Membership
The VLAN Membership page is divided into two sections. The top section contains fields that define
the entire VLAN’s membership. The bottom section contains tables that define membership settings for
specific Ports and LAGs on this VLAN. Following are the VLAN Membership fields:
•
Show VLAN
— Selects the VLAN to display. Use either the
VLAN ID
or
VLAN Name
drop-down
menu to select the VLAN.
•
VLAN Name (0–32)
— Indicates the user-defined VLAN name. This field is defined using the
Add
button. Valid names can range from 0–32 characters in length.
•
Status
—Indicates the VLAN type. Possible values are:
–
Dynamic
— Indicates the VLAN was dynamically created through GVRP.
–
Static
— Indicates the VLAN is user-defined and may be modified.
To Next Page
Loading...
