Dell PowerConnect 8024 - Page 353

Configuring Switching Information 353
Figure 7-59. MAC - VLAN Bind Table
Modifying VLAN for Multiple MAC Addresses
1. Open the Bind MAC to VLAN page.
2. Click Show All .
The
MAC - VLAN Bind Table displays.
3. Click Edit for each MAC Address with a VLAN to modify.
4. Edit the Bind to VLAN fields.
5. Click Apply Changes .
The MAC to VLAN settings are modified, and the device is updated.
Removing a MAC - VLAN Entry
1. Open the Bind MAC to VLAN page.
2. Click Show All .
The
MAC - VLAN Bind Table displays.
3. Check Remove for each entry to remove.
4. Click Apply Changes .
The entry/entries are removed, and the device is updated.
Binding a MAC to a VLAN Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide :
• VLAN Commands
The following table summarizes the equivalent CLI commands for this feature.