Dell PowerConnect 8024 - Page 355

Configuring Switching Information 355
2. Enter the IP Address to bind to the VLAN.
3. Enter the IP Subnet associated with the IP address.
4. Enter the VLAN ID to which the IP address and subnet mask are assigned.
5. Click Apply Changes .
The listed VLAN and IP Subnet are now bound, and the device is updated.
Displaying the IP Subnet - VLAN Bind Table
1. Open the Bind IP Subnet to VLAN page.
2. Click Show All .
3. The IP Subnet - VLAN Bind Table displays.
Figure 7-61. IP Subnet - VLAN Bind Table
Modifying the VLAN Bound to Multiple IP Addresses
1. Open the Bind IP Subnet to VLAN page.
2. Click Show All .
The
IP Subnet - VLAN Bind Table displays.
3. Click Edit for each entry to modify.
4. Edit the fields as needed.
5. Click Apply Changes .
The Bind to VLAN settings are modified, and the device is updated.
Removing a VLAN - IP Subnet Entry
1. Open the Bind IP Subnet to VLAN page.
2. Click Show All .
The
IP Subnet - VLAN Bind Table displays.
3. Check Remove for each entry to remove.