360 Configuring Switching Information
Use the GVRP Global Parameters page to enable GVRP globally. You can also enable GVRP on a per-
interface basis.
To display the GVRP Global Parameters page, click Switching
→
VLAN
→
GVRP Parameters in the tree
view.
Figure 7-65. GVRP Global Parameters
The GVRP Global Parameters page contains the following fields:
•
GVRP Global Status
— Enables or disables GVRP on the switch. GVRP is disabled by default.
•
Interface
— Specifies the Unit and Port or LAG for which GVRP is enabled.
•
GVRP State
— Enables or disables GVRP on the specified interface.
•
Dynamic VLAN Creation
— Enables or disables VLAN creation through GVRP.
•
GVRP Registration
— Enables or disables GVRP Registration.
Enabling GVRP On the Switch
1.
Open the
GVRP Global Parameters
page.
2.
Select
Enable
in the
GVRP Global Status
field.
3.
Click
Apply Changes
.
GVRP is enabled on the switch.
Enabling VLAN Registration Through GVRP
1.
Open the
GVRP Global Parameters
page.
To Next Page
Loading...
