Dell PowerConnect 8024 - Page 490

490 Configuring Routing
Table 9-2. ARP Table Commands
CLI Command Description
arp cachesize Configures the maximum number of entries in the ARP cache.
arp dynamicrenew Enables the ARP component to automatically renew dynamic ARP
entries when they age out.
arp purge Causes the specified IP address to be removed from the ARP cache.
arp resptime Configures the ARP request response timeout.
arp retries Configures the ARP count of maximum request for retries.
arp timeout Configures the ARP entry age-out time.
clear arp-cache Removes all ARP entries of type dynamic from the ARP cache.
clear arp-cache management Removes all entries from the ARP cache learned from the management
port.
show arp Displays the Address Resolution Protocol (ARP) cache.
show arp brief Displays the brief Address Resolution Protocol (ARP) table
information.